Scott Henderson Discussion

erix66 · Joined: 18 Oct 2009 Posts: 8

Hey Scott,
I was wondering what settings you use when using the echoboy plugin. I love the delay sounds you got on the suhr SH 100 amp videos. And also on the last HBC album. Do you use pre sets that are already in the plugin ? Or make your own patches? Im trying to get some cool delays with the echoboy for a couple of tracks. I heard that Mr Landau uses it too. Maybe you can put me in the right direction. Im pretty sure your putting the delay in a bus right? Thanks again!!
Eric

randope · Joined: 13 Nov 2012 Posts: 20 Location: Indonesia

I'm not Scott, obviously, but I thought I might show you a post he made about his EchoBoy settings.

http://online-discussion.dhenderson.com/ScottHenderson/viewtopic.php?t=1247&sid=3ee8db9fd03c2d27f1599709d4f5c6f7

Actually very convenient that you asked because I'm also trying to dial in a good delay setting on my pedal. I find it a little odd that he puts the high cut, low cut, and saturation all the way down. Wouldn't it cover up the dry signal too much?

Cheers,
Randy

Scott Henderson · The Man Joined: 20 May 2004 Posts: 2135

As I said in that post, my favorite preset is Studio Tape, 450ms, feedback at 10 o'clock. It's a factory preset - all I did was turn the modulation off. The high cut and low cut knobs are all the way down by default, which means they aren't doing anything. Normally I would cut the highs on an echo but I think this preset is very warm sounding and doesn't need a high cut. It's on a bus, so the dry signal is off.